Gang Mowers

A horizontal grass mower is commonly called Rotary Slasher. Rotary slasher works in conjunction with a tractor. They are attached behind the tractor and they are tractor driven and they have reversible steel blades for cutting wild grass, weeds, sugar cane etc. Rotary slasher is ideal for usage in large farms and agricultural lands. Another profound use of rotary slasher in horticulture and agriculture industry is to mix seeds and fertilizers with the soil of farms. Tractor mounted rotary slasher are the most cost effective grass cutting solutions for farmers and agriculturist.

We have a comprehensive Range of Rotary Slasher that comprises of the tractor-driven shrub master. This machine is equipped with swing back steel blades, which can easily cut wild grass, shrubs, weeds and sugar cane stacks. We believe in delivering quality products and our products match Indian as well as international quality standards. Our product is fitted with high blade tip speed and bevel gears for more reliable results. 

Some of the salient features of our rotary slasher include:

• Our rotary slasher is mounted with front and rear rollers which give efficient results while dealing with tall weeds, small bushes and short turf with minimal scalping.
• Our rotary slasher is equipped with powerful blades to give fine and smooth cutting
• In damp and moist climate conditions, our rotary slashers can still handle and discharge grass efficiently.

• The ganging frames have a common unit frame: The Framework is so designed that there are no upward projections, thus enabling the mowers to run under low hanging trees etc. and cut grass will not adhere to choke the mowers

• Chassis: Unbreakable, Reinforced steel, Firmly braced by axle and bottom block assembly

• Transmission: The cylinder is driven at both ends from road wheels through hardened steel machined cut gears, totally enclosed in OIL BATH and ratchet drive to facilitate turning. Clutches fitted enables the cylinder to be taken out of gear and helps in transportation

• Gear Drive Type: All gears are fitted with bearing for longer life

• Cutting Cylinder: Blades running on heavy duty ball bearings

• Cutting Ratio: 1. at 08Kph 1.0 Acre per hour / unit 2. At 08Kph 3.0 Acres per hour / 3 unit 3. At 10Kph 1.4 Acres per hour/ unit 4. At 10Kph 4.2 Acres per hour/3 unit. 5. At 16Kph 2.0 Acres per hour / unit 6. At 16Kph 6.0 Acres per hour / 3 unit

• Cutting Width: 1. 1 unit - 76 cm (2ft 6in) 2. 3 unit-2.10m ( 7ft 0in )

• Overall Width:  5. 1 unit -1 22m (4ft 0in) 6. 3 unit-2.59m ( 8ft 6in)

• Overall Length: 1. 1 unit - 81 cm (2ft 8in) 2. 3 unit-2.59m ( 8ft 6in)

• Clutch: A Clutch is fitted to each gearbox to engage the drive to the cutting cylinder Carriages: Unbreakable

• Adjustment: Cutting height can be adjusted from 1/2 to 8 Inches

• Rear-Roll: Running on bearings on both sides

• Wheels (classic): Pressed steel studded wheels Specially fitted with double ball bearings.

• Paint: Powder coated / Liquid Painted

• Cutting Speed Recommended: Depending upon the ground conditions, between 8-16 Kmph where conditions are not so good it is recommended to reduce the speed to 5-8 Kmph. These are widely used for cutting large areas as public parks, playing fields and golf grounds.